AT5669 5-Channel Motor Driver for DVD/VCD with 2 Linear Regulator and 1 OPAMP Features 4 channels of DC motor BTL driver 1 channels forward/reverse control DC motor driver Built-in suspension function. Built-in 2 Linear Regulator Built-in 1-Channel operational amplifier. Built-in thermal shutdown circuit. Operating voltage: 4.5V~13.2V Description The AT5669 is a 5-channel BTL driver IC. Two of them can drive DC motors and two can drive coils, such as the focus and tracking actuators of a CD-ROM/DVD-ROM/DVD-Player system It also built-in one channel bi-direction DC motor driver for Tray. Using the built-in linear regulator, it can be save the PCB space. It also includes 1 operational amplifier. Applications CD-ROM/DVD-ROM/CD-RW drives DVD player. Block Diagram Aimtron reserves the right without notice to change this circuitry and specifications. 7F, NO.9, Park Avenue II, Science-Based Industrial Park, Hsinchu 300, Taiwan, R.O.C. Tel: 886-3-563-0878 Fax: 886-3-563-0879 WWW: http://www.aimtron.com.tw 8/22/2006 REV:1.1 Email: service@aimtron.com.tw 1 AT5669 5-Channel Motor Driver for DVD/VCD with 2 Linear Regulator and 1 OPAMP Pin Descriptions Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Pin name Function CH1(Focus coil) input Linear Regulator 3V3 driver output Linear Regulator 2 feedback input CH2(Sled driver) input Linear Regulator 3V3 input CH5 forward input CH5 reverse input Power Supply 1 CH5(Tray driver) output(-) CH5(Tray driver) output(+) CH2(Sled driver) output (+) CH2(Sled driver) output (-) CH1(Focus coil) output (-) CH1(Focus coil) output (+) CH4(Tracking coil) output (+) CH4(Tracking coil) output (-) CH3(Spindle) output (+) CH3(Spindle) output (-) Power Supply 2 OP positive input CH5 Speed control input OP negative input CH3(Spindle) input OP Output Adjustable Linear Regulator driver output CH4 (Tracking driver) input VREF input pin Mute control for CH1,CH2,CH3,CH4 IN1 DL1 FB2 IN2 3V3 FWD REV VCC1 OUT5OUT5+ OUT2+ OUT2OUT1OUT1+ OUT4+ OUT4OUT3+ OUT3VCC2 CPIP VCTL CPIN IN3 CPO DL2 IN4 VBIAS MUTE_1_2_3_4 Notes: The indicated polarities for the output pins are under the condition that all inputs are (+). The power supplies for the driver output are Vcc1 for the loader, Vcc2 for focus and tracking drivers, and Vcc for pre-block and sled driver. Therefore, make sure Vcc1 Vcc2. Pin Out 7F, NO.9, Park Avenue II, Science-Based Industrial Park, Hsinchu 300, Taiwan, R.O.C. Tel: 886-3-563-0878 Fax: 886-3-563-0879 WWW: http://www.aimtron.com.tw 8/22/2006 REV:1.1 Email: service@aimtron.com.tw 2 AT5669 5-Channel Motor Driver for DVD/VCD with 2 Linear Regulator and 1 OPAMP Ordering Information Part number AT5669H AT5669H_PBF Package 28-pin HSOP 28-pin HSOP, PB-Free Marking AT5669H AT5669H, Date Code with one bottom line Power Dissipation (Ta = 25oC) Condition: mount on 50x50 mm2 t=1.0mm paper phenol PCB Absolute maximum ratings (Ta = 25oC) Parameter Power supply voltage Power dissipation Operating temperature Storage temperature NOTE:* 1. Power dissipation reduces 13.6mW / C for using above Ta=25C 2. Do not exceed Pd and SOA. Symbol VCC1,2 Pd Topr Tstg Limits 13.5 1.7 -30~+80 -55~+150 unit V W o C o C Recommended operating conditions (Ta = 25oC) Parameter Power supply voltage Symbol VCC1 VCC2 Limits 4.0~13.2 4.0~Vcc1 unit V V 7F, NO.9, Park Avenue II, Science-Based Industrial Park, Hsinchu 300, Taiwan, R.O.C. Tel: 886-3-563-0878 Fax: 886-3-563-0879 WWW: http://www.aimtron.com.tw 8/22/2006 REV:1.1 Email: service@aimtron.com.tw 3 AT5669 5-Channel Motor Driver for DVD/VCD with 2 Linear Regulator and 1 OPAMP Electrical characteristics (unless otherwise noted, Ta = 25oC,VCC1 =5V, VCC2 =5V, VBIAS=2.5V, RL1= RL4=10 Parameter Quiescent current Mute quiescent current Bias input current Mute ON voltage Mute OFF voltage |